Author Topic: Phidget 1048 Temperature() [Error 126]  (Read 26236 times)

Offline erm0304

  • Newbie
  • *
  • Solid or Perf: Solid
  • Serial Number: 1123
  • J or T : T
Phidget 1048 Temperature() [Error 126]
« on: November 14, 2016, 03:49:06 PM »
I am trying to set up artisan 0.9.9 and am getting the following error after following the installation guidance:  "The specified module could not be found @line 29087".  Also ET, BT, and MET are all showing -1. Thank you in advance.

Offline SusanJoM

  • Administrator
  • Hero Member
  • *****
  • Solid or Perf: both/either
  • Serial Number: 454 (perf) 1243 (solid)
  • J or T : J
  • Charge Weight : 350 gm
Re: Phidget 1048 Temperature() [Error 126]
« Reply #1 on: November 14, 2016, 03:53:55 PM »
Pictures of your Configuration pages would help.
"There is a crack in everything, That's how the light gets in." Leonard Cohen.

Offline erm0304

  • Newbie
  • *
  • Solid or Perf: Solid
  • Serial Number: 1123
  • J or T : T
Re: Phidget 1048 Temperature() [Error 126]
« Reply #2 on: November 14, 2016, 05:04:27 PM »
What other configurations would be helpful to see?

Offline SusanJoM

  • Administrator
  • Hero Member
  • *****
  • Solid or Perf: both/either
  • Serial Number: 454 (perf) 1243 (solid)
  • J or T : J
  • Charge Weight : 350 gm
Re: Phidget 1048 Temperature() [Error 126]
« Reply #3 on: November 14, 2016, 05:14:10 PM »
Okay, those first two look fine, and obviously the third is what we are trying to figure out.

Run through the Phidgets download just to be sure you have covered all the bases there, especially whether you wired the Phidget up right (right to left instead of left to right) and did whatever (I can't remember) Phidget told you to do to  install it and close down the Phidget control panel....
https://www.hukyforum.com/index.php?action=downloads;cat=1

Right....I'm fishing, but I'm hoping we can catch something....
"There is a crack in everything, That's how the light gets in." Leonard Cohen.

Offline Wayneg1

  • Global Moderator
  • Full Member
  • *****
  • Solid or Perf: Perforated
  • Serial Number: 825
  • J or T : T
  • Charge Weight : 400
Re: Phidget 1048 Temperature() [Error 126]
« Reply #4 on: November 14, 2016, 06:00:18 PM »
From the Phidget download you can run a test and it will let you know if it's connected.  I would try that first and then move on to Artisan.

Offline erm0304

  • Newbie
  • *
  • Solid or Perf: Solid
  • Serial Number: 1123
  • J or T : T
Re: Phidget 1048 Temperature() [Error 126]
« Reply #5 on: November 14, 2016, 06:43:15 PM »
Uninstalled Fidget download and reinstalled.  It works fine now.  Thank you for the help.

Offline Wayneg1

  • Global Moderator
  • Full Member
  • *****
  • Solid or Perf: Perforated
  • Serial Number: 825
  • J or T : T
  • Charge Weight : 400
Re: Phidget 1048 Temperature() [Error 126]
« Reply #6 on: November 14, 2016, 08:06:37 PM »
Uninstalled Fidget download and reinstalled.  It works fine now.  Thank you for the help.

Great!  Happy Roasting

Offline MasterKraus

  • Newbie
  • *
  • "Not all those who wander are lost"
  • Solid or Perf: Solid
  • Serial Number: 1328
  • J or T : T
  • Charge Weight : 453g
Re: Phidget 1048 Temperature() [Error 126]
« Reply #7 on: August 23, 2017, 05:36:52 PM »
Anyone else have this issue since this thread was updated? I have the same error on a fresh install. Because I'm using a work laptop, it involves lots of favors and schmoozing to get IT to authorize non-work-related software. Hoping for an alternate solution here that doesn't involve buying my own laptop :-)

Thanks guys, sorry for surfacing an old thread.

-Chris
--
Chris Kraus, Huky 500T
Founder, Manual Coffee Co.
https://www.manualcoffee.co

Offline SusanJoM

  • Administrator
  • Hero Member
  • *****
  • Solid or Perf: both/either
  • Serial Number: 454 (perf) 1243 (solid)
  • J or T : J
  • Charge Weight : 350 gm
Re: Phidget 1048 Temperature() [Error 126]
« Reply #8 on: August 23, 2017, 05:48:24 PM »
What version of the Phidget libraries did you install?
"There is a crack in everything, That's how the light gets in." Leonard Cohen.

Offline MasterKraus

  • Newbie
  • *
  • "Not all those who wander are lost"
  • Solid or Perf: Solid
  • Serial Number: 1328
  • J or T : T
  • Charge Weight : 453g
Re: Phidget 1048 Temperature() [Error 126]
« Reply #9 on: August 23, 2017, 06:41:08 PM »
Yes, that would be v22. Just completed a test install of v21 on my desktop and everything works fine. Now to convince the IT manager to install v21 on my laptop for me ...
--
Chris Kraus, Huky 500T
Founder, Manual Coffee Co.
https://www.manualcoffee.co

 

Resources

PRICING and FAQs

ARTISAN RESOURCES

PHIDGET INFORMATION

ROASTING GUIDES

ROASTING TERMINOLOGY

GREENS SOURCES

A FEW VIDEOS

Temperature Converter

Celsius:
Fahrenheit:
Kelvin:

Recent Topics

Rob Hoos article on Thermocouples by SusanJoM
August 31, 2017, 02:52:23 PM

CFM range for exhaust fan by edtbjon
August 30, 2017, 08:13:09 PM

Standard Stove - any ideas what to substitute it with at the European market? by hankua
August 30, 2017, 08:07:16 AM

Just Purchased, Hello from Claymont, DE! by hankua
August 30, 2017, 07:57:21 AM

Hello from Melbourne, Australia! by hankua
August 30, 2017, 07:55:07 AM

New to Roasting (opportunity to buy a Huky) by hankua
August 30, 2017, 07:52:18 AM

Hello from South Korea! by K.Brown
August 30, 2017, 05:40:09 AM

First Roast with Artisan, Feedback Appreciated by edtbjon
August 28, 2017, 04:17:34 AM

And another checklist to validate… by SusanJoM
August 25, 2017, 09:15:43 AM

Estimated Cost after Mods and Tools For Maintenance etc. etc. by edtbjon
August 25, 2017, 01:46:56 AM

Phidget 1048 Temperature() [Error 126] by MasterKraus
August 23, 2017, 06:41:08 PM

Any ordering at MLGP by jay
August 22, 2017, 06:44:05 AM

Powered by EzPortal