Received 500T - Coming from a HotTop

[navystan]

Hey guys,

What is the recommended variac knock off from eBay? Thanks!

Here it is:

http://www.ebay.com/itm/Variable-AC-Transformer-500VA-Variac-0-130V-TDGC2-0-5-/381200336676?hash=item58c14f8724:g:kkkAAOxyhtpR6Gx7

[navystan]

OK, any confirmation would be nice.  See attached pictures.  I had to install the ET probe that Mr. Li forgot to install.  Does it look right?

Thanks!

[SusanJoM]

It looks good on the HUKY.
Do you want to flip the Phidget over and attach a picture of it?
And/or just verify that it is wired from right (BT) to left (ET) to lefter(MET)....

[navystan]

It looks good on the HUKY.
Do you want to flip the Phidget over and attach a picture of it?
And/or just verify that it is wired from right (BT) to left (ET) to lefter(MET)....

Susan, yes, I moved the MET over to the left and inserted the right/new ET into the second position from the right.  So, from right to left:  ET, BT, MET.  Right?

Well, I can now plug the 1048 into my MacBook Air, but I couldn't get the SBC with the wireless adapter to work.  So, if I can't figure out how to get the SBC to work with the wireless, then I guess I have to use my MacBook Air to talk to m iPad.  The Roastmaster works off the iPad so I either have to get the SBC/wireless to work or just plug in 1048 sensor into my MacBook Air.

[SusanJoM]

Susan, yes, I moved the MET over to the left and inserted the right/new ET into the second position from the right.  So, from right to left:  ET, BT, MET.  Right?

Looks Good

I couldn't get the SBC with the wireless adapter to work.

As far as getting the SBC wireless configuration working, you might want to start a thread asking for help on that specific subject.  You might also do some searching and inquiring over at HB where I think I have seen the subject broached.  And, lastly, the Phidgets site has good help articles if you haven't already looked there. http://www.phidgets.com/docs/Use_Phidgets_Wirelessly_with_the_SBC

[navystan]

Susan, yes, I moved the MET over to the left and inserted the right/new ET into the second position from the right.  So, from right to left:  ET, BT, MET.  Right?

Looks Good

I couldn't get the SBC with the wireless adapter to work.

Actually, BT, ET, and then MET from right to left.

As far as getting the SBC wireless configuration working, you might want to start a thread asking for help on that specific subject.  You might also do some searching and inquiring over at HB where I think I have seen the subject broached.  And, lastly, the Phidgets site has good help articles if you haven't already looked there. http://www.phidgets.com/docs/Use_Phidgets_Wirelessly_with_the_SBC

[SusanJoM]

Yes, absolutely.  I typed it wrong.  First BT (position 0) then ET (position 1) then MET (position 2).

Apologies for confusing you when you were doing it exactly right ! ! !