Author Topic: Pre-purchase check  (Read 5141 times)

Offline dtaft11

  • Newbie
  • *
Pre-purchase check
« on: March 13, 2017, 02:09:24 PM »
Hi all, really appreciate the wealth of knowledge I've utilized on this site. I've had an initial conversation with Mr. Li, but wanted to have the community here give feedback on my list. Excited to have the 500T as a more reliable sample roaster where I work.

Huky 500T
Solid Drum 72 RPM Motor
Quick connect
IR Stove with Natural gas attachment
Exhaust hood
BT, ET and Extra MET thermocouples. All Digitial.
Extra Tray
Extra Fan
Extra Funnel


Let me know of any recommended edits, thanks!

Offline hankua

  • Global Moderator
  • Hero Member
  • *****
  • Flame On!
  • Solid or Perf: Solid
  • Serial Number: 321
  • J or T : J
  • Charge Weight : 324g/454g
Re: Pre-purchase check
« Reply #1 on: March 16, 2017, 02:42:27 AM »
Sounds good!

NG home pressures generally run half what a propane take can; you might want to swap out the gauge. Wait till you have the machine in operation, and see if the stock gauge is sufficient.

If not, Dwyer has one with a smaller range.

 

Resources

PRICING and FAQs

ARTISAN RESOURCES

PHIDGET INFORMATION

ROASTING GUIDES

ROASTING TERMINOLOGY

GREENS SOURCES

A FEW VIDEOS

Temperature Converter

Celsius:
Fahrenheit:
Kelvin:

Recent Topics

Rob Hoos article on Thermocouples by SusanJoM
August 31, 2017, 02:52:23 PM

CFM range for exhaust fan by edtbjon
August 30, 2017, 08:13:09 PM

Standard Stove - any ideas what to substitute it with at the European market? by hankua
August 30, 2017, 08:07:16 AM

Just Purchased, Hello from Claymont, DE! by hankua
August 30, 2017, 07:57:21 AM

Hello from Melbourne, Australia! by hankua
August 30, 2017, 07:55:07 AM

New to Roasting (opportunity to buy a Huky) by hankua
August 30, 2017, 07:52:18 AM

Hello from South Korea! by K.Brown
August 30, 2017, 05:40:09 AM

First Roast with Artisan, Feedback Appreciated by edtbjon
August 28, 2017, 04:17:34 AM

And another checklist to validate… by SusanJoM
August 25, 2017, 09:15:43 AM

Estimated Cost after Mods and Tools For Maintenance etc. etc. by edtbjon
August 25, 2017, 01:46:56 AM

Phidget 1048 Temperature() [Error 126] by MasterKraus
August 23, 2017, 06:41:08 PM

Any ordering at MLGP by jay
August 22, 2017, 06:44:05 AM

Powered by EzPortal