Forum > Data Logging
Artisan_2 USB ports
(1/1)
suarphi:
Hi all,
While I wait for the extech manometer in the mail, I want to ask if Artisan can read 2 USB inputs; my current Omega for temp, and the extech manometer for gas pressure. If not, is this phidget territory?
Thanks,
Anthony
Chert:
I think it is Phidgets territory unless Artisan has gained capability in manometer input since 2015:
http://www.home-barista.com/home-roasting/phidget-and-artisan-and-gas-and-air-pressures-t34759.html?hilit=i%20installed%20phidgets#p394627
suarphi:
Update:
Artisan does work with 2 USB inputs, able to get temp & gas pressure from the Extech 755!
beananimal:
It can work with two USB, but it depends what you want to connect.
E.g. no two 1048, if you want two play around.
( Ok, there is no real for that)
SusanJoM:
Here is part of a post from Marko on the Artisan User List
While Artisan supports only one 1048 or 1046, any number of 1045 should be supported as is true for a number of other supprted devices (with only a few exceptions).
Navigation
[0] Message Index
Go to full version