Author Topic: And another checklist to validate…  (Read 36005 times)

Offline Bunkmil

  • Newbie
  • *
And another checklist to validate…
« on: August 24, 2017, 02:30:14 PM »
Hi all,

I’m about to finally pull the trigger and order my Huky setup. Here’s my list of items so far. I’ll be roasting in my garage so I want to make sure that I have everything needed to send the smell/smoke outside.

•   HUKY 500T (Solid drum with 72rpm motor)
•   Digital probes (ET, BT and MET)
•   Infrared stove
•   Exhaust bowl
•   Extra sieve/tray
•   Extra thermocouple (MET)
•   Extra fan
•   Extra funnel

I’ll order a Phidget 1048 with the case and I already have a Variac at home to control the fan speed.

Anything else I should add to my list?

Thanks!
« Last Edit: August 25, 2017, 08:51:23 AM by Bunkmil »

Offline Bunkmil

  • Newbie
  • *
Re: And another checklist to validate…
« Reply #1 on: August 25, 2017, 06:02:30 AM »
I see a lot of people also ordering an extra fan and an extra funnel.

May I ask what are the pros of having those extras ? I don't mind adding them to my list but I just don't want to order stuff that I won't be using.

Offline Wayneg1

  • Global Moderator
  • Full Member
  • *****
  • Solid or Perf: Perforated
  • Serial Number: 825
  • J or T : T
  • Charge Weight : 400
Re: And another checklist to validate…
« Reply #2 on: August 25, 2017, 07:01:45 AM »
Hi there and welcome.

One tray, fan and funnel are used with the exhaust bowl for air flow and expelling smoke.

The other funnel is used when charging with beans.

A second tray and fan are used when dropping and cooling the roasted beans.

Cheers.  :)

Offline Bunkmil

  • Newbie
  • *
Re: And another checklist to validate…
« Reply #3 on: August 25, 2017, 07:51:24 AM »

A second tray and fan are used when dropping and cooling the roasted beans.


Thanks for the reply!

Then would I also need a second exhaust bowl to vent outside while cooling ? Or can I just swap the bowl once the beans are dropped ?

Offline SusanJoM

  • Administrator
  • Hero Member
  • *****
  • Solid or Perf: both/either
  • Serial Number: 454 (perf) 1243 (solid)
  • J or T : J
  • Charge Weight : 350 gm
Re: And another checklist to validate…
« Reply #4 on: August 25, 2017, 08:39:24 AM »
Nope. 
Your cooling doesn't need any venting.  All you need for cooling is a sieve and a fan.
"There is a crack in everything, That's how the light gets in." Leonard Cohen.

Offline Bunkmil

  • Newbie
  • *
Re: And another checklist to validate…
« Reply #5 on: August 25, 2017, 08:54:02 AM »
Nope. 
Your cooling doesn't need any venting.  All you need for cooling is a sieve and a fan.

Ok thanks! That make sense.

I edited my initial list to add the extra fan and extra funnel.

I think I can now proceed!

Offline Bunkmil

  • Newbie
  • *
Re: And another checklist to validate…
« Reply #6 on: August 25, 2017, 09:11:43 AM »
Oh and I have another question for you.

Does the infrared stove come with a hose and all the proper fittings to connect to a standard BBQ tank ?

Offline SusanJoM

  • Administrator
  • Hero Member
  • *****
  • Solid or Perf: both/either
  • Serial Number: 454 (perf) 1243 (solid)
  • J or T : J
  • Charge Weight : 350 gm
Re: And another checklist to validate…
« Reply #7 on: August 25, 2017, 09:15:43 AM »
Yes and No.
It will come with fittings you can use.
I don't think they are quite safe enough, but they will work.

Do some searching and you will find threads and pictures of better fittings to make the set-up more secure.   
"There is a crack in everything, That's how the light gets in." Leonard Cohen.

 

Resources

PRICING and FAQs

ARTISAN RESOURCES

PHIDGET INFORMATION

ROASTING GUIDES

ROASTING TERMINOLOGY

GREENS SOURCES

A FEW VIDEOS

Temperature Converter

Celsius:
Fahrenheit:
Kelvin:

Recent Topics

Rob Hoos article on Thermocouples by SusanJoM
August 31, 2017, 02:52:23 PM

CFM range for exhaust fan by edtbjon
August 30, 2017, 08:13:09 PM

Standard Stove - any ideas what to substitute it with at the European market? by hankua
August 30, 2017, 08:07:16 AM

Just Purchased, Hello from Claymont, DE! by hankua
August 30, 2017, 07:57:21 AM

Hello from Melbourne, Australia! by hankua
August 30, 2017, 07:55:07 AM

New to Roasting (opportunity to buy a Huky) by hankua
August 30, 2017, 07:52:18 AM

Hello from South Korea! by K.Brown
August 30, 2017, 05:40:09 AM

First Roast with Artisan, Feedback Appreciated by edtbjon
August 28, 2017, 04:17:34 AM

And another checklist to validate… by SusanJoM
August 25, 2017, 09:15:43 AM

Estimated Cost after Mods and Tools For Maintenance etc. etc. by edtbjon
August 25, 2017, 01:46:56 AM

Phidget 1048 Temperature() [Error 126] by MasterKraus
August 23, 2017, 06:41:08 PM

Any ordering at MLGP by jay
August 22, 2017, 06:44:05 AM

Powered by EzPortal