Author Topic: New to Roasting (opportunity to buy a Huky)  (Read 24739 times)

Offline K.Brown

  • Newbie
  • *
  • Keep trying till you get it right
  • Solid or Perf: Solid
  • Serial Number: 949
  • J or T : T
New to Roasting (opportunity to buy a Huky)
« on: August 26, 2017, 08:18:04 PM »
Hi guys,

I'm very new to the forum and I've been reading quite a bit about the Huky. What I would really like to know is if I cannot master a roast, have even your worst attempts been drinkable?

I'm hoping that this doesn't turn out to be so complicated that I just shut down. I have an opportunity to purchase a use Huky approximately 1 year old. Is there anything you would look for before buying?

Thanks in advance for your input

Kevin

Offline SusanJoM

  • Administrator
  • Hero Member
  • *****
  • Solid or Perf: both/either
  • Serial Number: 454 (perf) 1243 (solid)
  • J or T : J
  • Charge Weight : 350 gm
Re: New to Roasting (opportunity to buy a Huky)
« Reply #1 on: August 26, 2017, 08:31:11 PM »
I wouldn't recommend a HUKY to anyone who has never roasted before. 


"There is a crack in everything, That's how the light gets in." Leonard Cohen.

Offline beananimal

  • Jr. Member
  • **
  • Solid or Perf: solid installed, performated available
  • Serial Number: 363
  • J or T : T (+J)
  • Charge Weight : 333g or 400g
Re: New to Roasting (opportunity to buy a Huky)
« Reply #2 on: August 26, 2017, 10:04:48 PM »
Hello Kevin,

I would like to soften a bit the clear statement from Susan.

For sure, the start with a Gene or a Behmor is easier and softer.

But if you are playing around a bit at start, with the empty roaster, to learn how it reacts and study the Artisan curves to have an idea what you are going for, it is really possible.
Maybe you will have the "chance" to blend some unplanned darker beans with a lighter roast, but this can happen with another roaster as well.

If it is just one roaster out of several options for you, check for a more simple version to start with.
If you like the Huky, the philosophy and what you see --- go for it.
The feeling about having bought the wrong compromize is much harder to take (for me).
Just my personal feeling
Peter
be an animal: be curious. trust you guts. play the game

Offline Igneous88

  • Newbie
  • *
  • Solid or Perf: Perf
  • Serial Number: 1307
  • J or T : T
Re: New to Roasting (opportunity to buy a Huky)
« Reply #3 on: August 27, 2017, 12:45:48 PM »
I started with a Huky, but I wouldn't recommend everyone to start here.  If you're a person who reads up on what to do, and study the forum, you'll have no problem jumping right in.  Just be aware that there is no right answer for a lot of things.  Also, be ready to learn for many roasts to come :)
« Last Edit: August 27, 2017, 12:50:32 PM by Igneous88 »

Offline K.Brown

  • Newbie
  • *
  • Keep trying till you get it right
  • Solid or Perf: Solid
  • Serial Number: 949
  • J or T : T
Re: New to Roasting (opportunity to buy a Huky)
« Reply #4 on: August 28, 2017, 05:58:59 AM »
Thanks everyone for your recommendations and suggestions.
My thoughts are since there are so many people who advocate for Huky and you can control so many variables at the right time while roasting it seems like the roaster to have, why start with anything else. Plus the roaster seem to hold its value if It doesn't work out.
Questions, what bean would you recommend to start with? cheaper is better as I'm probably not going to be the master roaster right out of the gate.

I have done a lot of reading and will be doing a lot more reading before my first few roasts.

Thanks
Kevin

Offline Wayneg1

  • Global Moderator
  • Full Member
  • *****
  • Solid or Perf: Perforated
  • Serial Number: 825
  • J or T : T
  • Charge Weight : 400
Re: New to Roasting (opportunity to buy a Huky)
« Reply #5 on: August 28, 2017, 06:13:27 AM »
Take a look at Bohdi Leaf Coffee Traders.  Sign up for the newsletter and you'll get notifications when beans are on sale.

Offline edtbjon

  • Hero Member
  • *****
  • Solid or Perf: Solid (Perforated in the closet)
  • Serial Number: 498
  • J or T : J (Trying out a Cyclone)
  • Charge Weight : 300-400g
Re: New to Roasting (opportunity to buy a Huky)
« Reply #6 on: August 29, 2017, 02:09:08 AM »
You may need 5 pounds of "waste" coffee to learn the roaster. (When buying a new roaster some people like to get the drum prepped with coffee oils coming from slightly over-roasting a few full loads of beans and letting them oil off inside the drum while the drum cools after roasting. It's also a good opportunity to learn the basics of how the roaster works and reacts.) So, maybe a small bag for learning the basics.

But to learn about roasting, get some decent beans and not the cheapest stuff. You will find very good templates to work from on this forum, so you will probably get a decent result quite soon. Nice washed Central Americans/Colombians etc. are easy to work with and quite forgiving. Unless you really mess it up the coffee will be nice and inspire you to go back to the roaster.
Now, dare I roast even lighter?

Offline K.Brown

  • Newbie
  • *
  • Keep trying till you get it right
  • Solid or Perf: Solid
  • Serial Number: 949
  • J or T : T
Re: New to Roasting (opportunity to buy a Huky)
« Reply #7 on: August 29, 2017, 01:32:12 PM »
Thanks for the roasting and bean tips guys. I've picked up my roaster last night and now setting things up.
I have a Center 304 which I'm having a hard time getting my Macbook Pro OS X El Capitan ver 10.11.6 to communicate with. I've decided to use the Artisan Program and was successful in downloading it to my computer.
Question: Am I having to install drivers and if so can anyone direct me to where I might be able to download them for my macbook pro?

Offline edtbjon

  • Hero Member
  • *****
  • Solid or Perf: Solid (Perforated in the closet)
  • Serial Number: 498
  • J or T : J (Trying out a Cyclone)
  • Charge Weight : 300-400g
Re: New to Roasting (opportunity to buy a Huky)
« Reply #8 on: August 29, 2017, 02:08:09 PM »
There's a recent link on Home-Barista on this very topic...
Now, dare I roast even lighter?

Offline K.Brown

  • Newbie
  • *
  • Keep trying till you get it right
  • Solid or Perf: Solid
  • Serial Number: 949
  • J or T : T
Re: New to Roasting (opportunity to buy a Huky)
« Reply #9 on: August 29, 2017, 06:56:42 PM »
Edtbjon

Thanks for you help I was able to piece things together with your referral. At least I think I have it figure out,  I downloaded a driver from https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers
and after doing so am able to now read my BT and ET via Artisan on my Macbook Pro

1 Step at a time  :D

Offline hankua

  • Global Moderator
  • Hero Member
  • *****
  • Flame On!
  • Solid or Perf: Solid
  • Serial Number: 321
  • J or T : J
  • Charge Weight : 324g/454g
Re: New to Roasting (opportunity to buy a Huky)
« Reply #10 on: August 30, 2017, 07:52:18 AM »
My opinion on the suitability of the Huky, is it's the best value/option for learning traditional gas coffee roasting. No it's not as easy to use as a professional one pounder machine, or a 1K for that matter. It will force one to learn how to manage heat, air, and the corresponding roasting profile.

Some people get Huky's with the idea it's a plug and play coffee roaster and end up dissapointed; that's how I snagged mine. And other's end up transitionating to a commercial shop roaster and going all in.

 

Resources

PRICING and FAQs

ARTISAN RESOURCES

PHIDGET INFORMATION

ROASTING GUIDES

ROASTING TERMINOLOGY

GREENS SOURCES

A FEW VIDEOS

Temperature Converter

Celsius:
Fahrenheit:
Kelvin:

Recent Topics

Rob Hoos article on Thermocouples by SusanJoM
August 31, 2017, 02:52:23 PM

CFM range for exhaust fan by edtbjon
August 30, 2017, 08:13:09 PM

Standard Stove - any ideas what to substitute it with at the European market? by hankua
August 30, 2017, 08:07:16 AM

Just Purchased, Hello from Claymont, DE! by hankua
August 30, 2017, 07:57:21 AM

Hello from Melbourne, Australia! by hankua
August 30, 2017, 07:55:07 AM

New to Roasting (opportunity to buy a Huky) by hankua
August 30, 2017, 07:52:18 AM

Hello from South Korea! by K.Brown
August 30, 2017, 05:40:09 AM

First Roast with Artisan, Feedback Appreciated by edtbjon
August 28, 2017, 04:17:34 AM

And another checklist to validate… by SusanJoM
August 25, 2017, 09:15:43 AM

Estimated Cost after Mods and Tools For Maintenance etc. etc. by edtbjon
August 25, 2017, 01:46:56 AM

Phidget 1048 Temperature() [Error 126] by MasterKraus
August 23, 2017, 06:41:08 PM

Any ordering at MLGP by jay
August 22, 2017, 06:44:05 AM

Powered by EzPortal