Author Topic: Rob Hoos article on Thermocouples  (Read 30275 times)

Offline SusanJoM

  • Administrator
  • Hero Member
  • *****
  • Solid or Perf: both/either
  • Serial Number: 454 (perf) 1243 (solid)
  • J or T : J
  • Charge Weight : 350 gm
Rob Hoos article on Thermocouples
« on: August 31, 2017, 01:10:36 PM »
You may have already seen TomC's link to this on HB, but if not....enjoy:

http://roastmagazine.com/resources/Articles/Roast_SeptOct17_OurWorldThruAKeyhole.pdf

It will keep you busy while we take a break during September
"There is a crack in everything, That's how the light gets in." Leonard Cohen.

Offline SusanJoM

  • Administrator
  • Hero Member
  • *****
  • Solid or Perf: both/either
  • Serial Number: 454 (perf) 1243 (solid)
  • J or T : J
  • Charge Weight : 350 gm
Re: Rob Hoos article on Thermocouples
« Reply #1 on: August 31, 2017, 02:52:23 PM »
And follow the conversation at H-B.

https://www.home-barista.com/home-roasting/rob-hoos-thermocouple-lesson-t48401.html#p547465

Marko's comments and caveats should be attended to in particular if you use Artisan.
"There is a crack in everything, That's how the light gets in." Leonard Cohen.

 

Resources

PRICING and FAQs

ARTISAN RESOURCES

PHIDGET INFORMATION

ROASTING GUIDES

ROASTING TERMINOLOGY

GREENS SOURCES

A FEW VIDEOS

Temperature Converter

Celsius:
Fahrenheit:
Kelvin:

Recent Topics

Rob Hoos article on Thermocouples by SusanJoM
August 31, 2017, 02:52:23 PM

CFM range for exhaust fan by edtbjon
August 30, 2017, 08:13:09 PM

Standard Stove - any ideas what to substitute it with at the European market? by hankua
August 30, 2017, 08:07:16 AM

Just Purchased, Hello from Claymont, DE! by hankua
August 30, 2017, 07:57:21 AM

Hello from Melbourne, Australia! by hankua
August 30, 2017, 07:55:07 AM

New to Roasting (opportunity to buy a Huky) by hankua
August 30, 2017, 07:52:18 AM

Hello from South Korea! by K.Brown
August 30, 2017, 05:40:09 AM

First Roast with Artisan, Feedback Appreciated by edtbjon
August 28, 2017, 04:17:34 AM

And another checklist to validate… by SusanJoM
August 25, 2017, 09:15:43 AM

Estimated Cost after Mods and Tools For Maintenance etc. etc. by edtbjon
August 25, 2017, 01:46:56 AM

Phidget 1048 Temperature() [Error 126] by MasterKraus
August 23, 2017, 06:41:08 PM

Any ordering at MLGP by jay
August 22, 2017, 06:44:05 AM

Powered by EzPortal