Huky Forum
START HERE => Pre Purchase => Topic started by: Igneous88 on July 01, 2017, 01:09:09 PM
-
I am brand new to this world of roasting, but super excited to get started. I've done a ton of reading on this forum and home-barista and would love your input on the list of parts I'm going to order.
I'm planning on going the NG route and have talked with Mr. Li to get the correct stove fittings and orifices. I have already ordered the Variac and phidget 1048 with case. Actually, I've already downloaded the drivers for it and have messed around in artisan... can't wait!
500T - BT, ET, MET all digital 1180 USD
48 rpm motor
Perforated drum
Replace Analog ET to ET Digital probe
Extra probe for MET 18 USD For the all digital BT, ET and MET config
Backup BT 18 USD
IR stove 99 USD Starting with NG with a 3/8" FIP fitting
propane orifice just in case I swap 3 USD Is this $3?
Exhaust Bowl 49 USD
Extra Sieve/Tray 16 USD
Extra Fan 48 USD
Extra Funnel 14 USD
Extra Motor 48rpm 20 USD
Shipping 196 USD
Total 1661 USD
Do I need to get extra bearings? If so, how many do I need to replace them in the machine? Would I need one or two?
Also, has anyone bought the 2.5 in exhaust tubing from Mr. Li? If so, what was the price?
Thank you for your input!
~Michael
-
Welcome to the World of Huky. Your list looks good to me. I think ordering extra stuff is a matter of personal preference. I've found Mr. Li ships extras very quickly so I only order if I actually need something. There are two bearings in the Huky; front and back. If you want an extra motor I'd suggest getting the motor set because from what I've heard it's a chore replacing just a motor. Let us know when you actually order your Huky.
-
Ordered this morning
-
Welcome to the World of Huky. Your list looks good to me. I think ordering extra stuff is a matter of personal preference. I've found Mr. Li ships extras very quickly so I only order if I actually need something. There are two bearings in the Huky; front and back. If you want an extra motor I'd suggest getting the motor set because from what I've heard it's a chore replacing just a motor. Let us know when you actually order your Huky.
Can you explain why I may need an extra exhaust bowl?
-
Welcome to the World of Huky. Your list looks good to me. I think ordering extra stuff is a matter of personal preference. I've found Mr. Li ships extras very quickly so I only order if I actually need something. There are two bearings in the Huky; front and back. If you want an extra motor I'd suggest getting the motor set because from what I've heard it's a chore replacing just a motor. Let us know when you actually order your Huky.
Can you explain why I may need an extra exhaust bowl?
??? You don't.