Artisan BT/ET Displaying -1

[ContralaCorriente]

First time setting up the Huky. On a mac. Have phidgets installed and confirmed that the temp sensors are works per the debugging literature on the phidgets website. I have also configured the device on Artisan for the 1048, added MET probe.

But, when I start a roast the LCD values all displat -1.0 and nothing graphs.

Feel like I am missing something simple, but have gone through all of the downloadable docs and coming up empty.

[SusanJoM]

What that '-1' means is that Artisan has sent out a request for information and come back empty.  So...something is not connected.

First thing I'd check is that your wires for ET and BT are in the correct Phidget terminals. 

[Adondo]

Do you get an error message to the top left as you see -1 values?

[ContralaCorriente]

Thanks guys. No error message and since the program wouldn't even run, but the Phidgets plugin was showing that it was receiving data from the probes, I thought there had to be a larger issue. I uninstalled Artisan and reinstalled and ta-da LCDs diplaying and graphs graphing. Now time to season the drum. Thanks for your help!

M