Artisan_2 USB ports

[suarphi]

Hi all,

While I wait for the extech manometer in the mail, I want to ask if Artisan can read 2 USB inputs; my current Omega for temp, and the extech manometer for gas pressure. If not, is this phidget territory?

Thanks,
Anthony

[Chert]

I think it is Phidgets territory unless Artisan has gained capability in manometer input since 2015:

http://www.home-barista.com/home-roasting/phidget-and-artisan-and-gas-and-air-pressures-t34759.html?hilit=i%20installed%20phidgets#p394627

[suarphi]

Update:

Artisan does work with 2 USB inputs, able to get temp & gas pressure from the Extech 755!

[beananimal]

It can work with two USB, but it depends what you want to connect.
E.g. no two 1048, if you want two play around.
( Ok, there is no real for that)

[SusanJoM]

Here is part of a post from Marko on the Artisan User List

While Artisan supports only one 1048 or 1046, any number of 1045 should be supported as is true for a number of other supprted devices (with only a few exceptions).