Author Topic: Paying Mr. Li  (Read 6266 times)

Offline Baxter

  • Newbie
  • *
  • Solid or Perf: Solid
  • Serial Number: 1024
  • J or T : T
  • Charge Weight : 454g
Paying Mr. Li
« on: April 24, 2016, 01:41:51 PM »
I've sent Mr. Li an order request and the total is $1,608.  When I send him the money by PayPal, do I need to request an amount higher than this to account for the PayPal fees (so net amount he gets is $1,608)  . . . or just request the $1608 and he eats the fees on his end?

By the way -- I'm getting the 500 T with 72 rpm motor, solid drum, exhaust bowl, as well as extra tray, fan, and funnel.

Thanks!

SusanJoM

  • Guest
Re: Paying Mr. Li
« Reply #1 on: April 24, 2016, 01:47:19 PM »
Just pay him what he has asked for.
He knows what he is doing by asking you for a specific amount.

Offline Baxter

  • Newbie
  • *
  • Solid or Perf: Solid
  • Serial Number: 1024
  • J or T : T
  • Charge Weight : 454g
Re: Paying Mr. Li
« Reply #2 on: April 24, 2016, 02:00:08 PM »
Got it.  My out of pocket is $1,608  . . . PayPal takes around $60 of that in fees . . . and Mr. Li ends up with $1,548.  I guess that difference is just the "cost of doing business" just like any other merchant pays when accepting a credit card.

Looking forward to getting the roaster.  I'll continue to read on this forum in the mean time as I'm preparing to use it.   I have been challenged by my wife to provide 50 lbs of roasted coffee by the end of May for teacher appreciation gifts -- a tall order for a newbie but I think I can do it given the helpful resources and folks on this forum.

Offline LTB

  • Full Member
  • ***
  • Solid or Perf: Both (solid on)
  • Serial Number: 1003
  • J or T : T
  • Charge Weight : 460 gr
Re: Paying Mr. Li
« Reply #3 on: April 26, 2016, 04:56:10 AM »
Strange, for me paypal added 75 $ fees. Well, I was paying in euros, obsviously, so that fees must have been the change ???

Anyway I get to more than 1900 USD.

Offline edtbjon

  • Hero Member
  • *****
  • Solid or Perf: Solid (Perforated in the closet)
  • Serial Number: 498
  • J or T : J (Trying out a Cyclone)
  • Charge Weight : 300-400g
Re: Paying Mr. Li
« Reply #4 on: April 26, 2016, 07:25:03 AM »
Strange, for me paypal added 75 $ fees. Well, I was paying in euros, obsviously, so that fees must have been the change ???

Anyway I get to more than 1900 USD.
I don't use Paypal that often, but if memory serves me correctly, I think that if you "buy" something that transaction is charged to the seller, but if you only "transfer money" you have to pay that paypal fee.
Now, dare I roast even lighter?

Offline hankua

  • Global Moderator
  • Hero Member
  • *****
  • Flame On!
  • Solid or Perf: Solid
  • Serial Number: 321
  • J or T : J
  • Charge Weight : 324g/454g
Re: Paying Mr. Li
« Reply #5 on: April 26, 2016, 02:38:18 PM »
The exchange rate in Taiwan fluxuates and is at a @ 4 year high on the US side (Taiwan money NT is down). He keeps things the same regardless, bottom line he's getting more NT on every sale. If you do the math it's quite spectacular  8)
« Last Edit: April 26, 2016, 02:41:27 PM by hankua »

Offline LTB

  • Full Member
  • ***
  • Solid or Perf: Both (solid on)
  • Serial Number: 1003
  • J or T : T
  • Charge Weight : 460 gr
Re: Paying Mr. Li
« Reply #6 on: April 29, 2016, 12:52:32 AM »
Hum... I don't understand all you said, Hankua, but what edtbjon said is that transferring money (what i did) I paid the fees that would have pay Mr Li ??? Well, he didn't say yes for that, anyway ! :)

Offline hankua

  • Global Moderator
  • Hero Member
  • *****
  • Flame On!
  • Solid or Perf: Solid
  • Serial Number: 321
  • J or T : J
  • Charge Weight : 324g/454g
Re: Paying Mr. Li
« Reply #7 on: April 29, 2016, 06:18:55 AM »
What I'm saying is Mr. Li's currency is NT, just like everyone else over there; in fact you need a special bank account to accept USD. Asian currencies are down to a record low, as far as I can remember it's been fluctuating from @ 28/1 to 32+/1; NT/usd.

Using the above exchange rates if one transfers 1500$ (usd) it could end up between 42,000NT To 48300NT for a difference of 6300NT. 6300/32=196.8 or $196 usd.

The is great for Mr. Li and every other Taiwan exporting business, as either they're products are less expensive or make more money in exchanging foreign currency. (Not sure about the euro/NT)

I'm not making any kind of judgements here, just some background information on the currency exchange. PayPal is the easiest and least expensive way to pay for a Huky, the fees are all on the sellers side.

« Last Edit: April 29, 2016, 06:28:29 AM by hankua »

 

Resources

PRICING and FAQs

ARTISAN RESOURCES

PHIDGET INFORMATION

ROASTING GUIDES

ROASTING TERMINOLOGY

GREENS SOURCES

A FEW VIDEOS

Temperature Converter

Celsius:
Fahrenheit:
Kelvin:

Recent Topics

Rob Hoos article on Thermocouples by SusanJoM
August 31, 2017, 02:52:23 PM

CFM range for exhaust fan by edtbjon
August 30, 2017, 08:13:09 PM

Standard Stove - any ideas what to substitute it with at the European market? by hankua
August 30, 2017, 08:07:16 AM

Just Purchased, Hello from Claymont, DE! by hankua
August 30, 2017, 07:57:21 AM

Hello from Melbourne, Australia! by hankua
August 30, 2017, 07:55:07 AM

New to Roasting (opportunity to buy a Huky) by hankua
August 30, 2017, 07:52:18 AM

Hello from South Korea! by K.Brown
August 30, 2017, 05:40:09 AM

First Roast with Artisan, Feedback Appreciated by edtbjon
August 28, 2017, 04:17:34 AM

And another checklist to validate… by SusanJoM
August 25, 2017, 09:15:43 AM

Estimated Cost after Mods and Tools For Maintenance etc. etc. by edtbjon
August 25, 2017, 01:46:56 AM

Phidget 1048 Temperature() [Error 126] by MasterKraus
August 23, 2017, 06:41:08 PM

Any ordering at MLGP by jay
August 22, 2017, 06:44:05 AM

Powered by EzPortal