Author Topic: Gas Tank Regulator and Tubing  (Read 7794 times)

Offline goodlife23

  • Newbie
  • *
Gas Tank Regulator and Tubing
« on: August 07, 2017, 01:29:48 PM »
I connected by roaster to my propane tank using the green regulator and tubing provided by Mr. Li and simply put am not getting any gas.  Thinking maybe I needed a different regulator, I searched online to find that none seem to come with the pointed end pieces where the tubes fits over. Anyone else have this issue and how did you resolve?

Offline Wayneg1

  • Global Moderator
  • Full Member
  • *****
  • Solid or Perf: Perforated
  • Serial Number: 825
  • J or T : T
  • Charge Weight : 400
Re: Gas Tank Regulator and Tubing
« Reply #1 on: August 07, 2017, 03:29:25 PM »
This has been a known issue on occasion.  Try this thread and it should get you on your way:

https://www.hukyforum.com/index.php/topic,138.msg5635.html#msg5635

Offline hankua

  • Global Moderator
  • Hero Member
  • *****
  • Flame On!
  • Solid or Perf: Solid
  • Serial Number: 321
  • J or T : J
  • Charge Weight : 324g/454g
Re: Gas Tank Regulator and Tubing
« Reply #2 on: August 08, 2017, 05:06:32 PM »
It'll be better in the long run to use the green regulator. Try tightening in in more or removing the rubber gasket. To use a US style regulator, you can either cut the supplied hose or put a barbed connector on the regulator.

Get the liquid pipe dope from Home Depot for gas fittings in the plumbing section for assembling gas fittings.

 

Resources

PRICING and FAQs

ARTISAN RESOURCES

PHIDGET INFORMATION

ROASTING GUIDES

ROASTING TERMINOLOGY

GREENS SOURCES

A FEW VIDEOS

Temperature Converter

Celsius:
Fahrenheit:
Kelvin:

Recent Topics

Rob Hoos article on Thermocouples by SusanJoM
August 31, 2017, 02:52:23 PM

CFM range for exhaust fan by edtbjon
August 30, 2017, 08:13:09 PM

Standard Stove - any ideas what to substitute it with at the European market? by hankua
August 30, 2017, 08:07:16 AM

Just Purchased, Hello from Claymont, DE! by hankua
August 30, 2017, 07:57:21 AM

Hello from Melbourne, Australia! by hankua
August 30, 2017, 07:55:07 AM

New to Roasting (opportunity to buy a Huky) by hankua
August 30, 2017, 07:52:18 AM

Hello from South Korea! by K.Brown
August 30, 2017, 05:40:09 AM

First Roast with Artisan, Feedback Appreciated by edtbjon
August 28, 2017, 04:17:34 AM

And another checklist to validate… by SusanJoM
August 25, 2017, 09:15:43 AM

Estimated Cost after Mods and Tools For Maintenance etc. etc. by edtbjon
August 25, 2017, 01:46:56 AM

Phidget 1048 Temperature() [Error 126] by MasterKraus
August 23, 2017, 06:41:08 PM

Any ordering at MLGP by jay
August 22, 2017, 06:44:05 AM

Powered by EzPortal